SIS130 Digital Dual-axis Tilt Switch

1. Measuring range: +/-10, +/-30, +/-90 degree 2. Low temperature drift 3. Resolution : 0.01 degree 4. Low cost SIS130 is a dual-axis tilt switch which is researched and produced by Witlink with high accuracy and high stability ,Its Measuring range is±90°, The switch action points and trigger delay time can be output and set through the RS232  serial communication port. It has ZERO setting function and response frequency adjustment function as well as optional Baud rate. It can be widely used in engineering mechanism field.Featurestwo-axis inclinometer  Customers can self-set switch alarm valuesZERO setting functionDC 9~36V wide voltage power supplyMulti-Measuring range   Four channel switch signal and RS232 outpout   Full Metal Jacket,IP68 protectionEntirely industrial parts of appratus,stable and credible performanceShockproof>20000gSmall volume,light weightreverse polarity protection,over loading short circuit protection.transistor drive,OC door outputApplicationsChain Block,Hoist,Crane.Aerial Platform Vehicle,lifterAutomatic orientation platformMining mechanism,oil-well drilling equipmentSecurity control,monitor,alarm  Electrical Characteristics

Parameters  Conditions   Min          Standard      Max         Units

  

 

Power supply	Non-regulated voltage	9	24	36	V
quiescent current	NO Load@ 25°C		<50		mA
operating temperature		-40		+85	°C
Store temperature		-55		+125	°C
Output current	@ 25°C			500	mA
Output voltage	I=500mA		VCC-0.5	VCC

Technical Datas

Parameters   Conditions    SIS130-10   SIS130-30  SIS130-90  Units

 

Measuring range		±10	±30	±90	°
Measuring axis		X-Y	X-Y	X-Y
Zero temperature drift	-25~85°	±0.008	±0.008	±0.008	°/°C
Trigger delay time	25°C	0.5	0.5	0.5	S
Frequency response	DC response	20	20	20	Hz
Resolution	5Hz	0.01	0.01	0.01	°
Accuracy		0.03	0.05	0.07	°
Cross-axis sensitivity	Max	3	3	3	%
long term stability		<0.014	<0.014	<0.014	°
Shockproof	20000g,0.5ms,3Times/Axis
Size	W40*L91*H26mm
Weight	130g(Without Box)

SIS130 Digital Dual-axis Tilt Switch